|
Drum Equipment Hand Trucks
Lift Equipment Platform Trucks & Carts Related Products
|
|
Zinc Die Cast Faucets
Features:
♦Zinc die cast alloy
♦Easy-to-use self-closing design
♦Can be padlocked in closed
position
♦.75" NPT connection
♦Viton gasket |
272083
272080
|
Part #: 272083
With flame arrestor
FM approved
for non-viscous liquids
Sold only in packages of 10
Part #: 272080
No flame arrestor
FM approved
for viscous liquids
Sold only in packages of 10
|
|
Heavy Duty
Brass Faucets
Features:
♦Easy-to-use self-closing design
♦.75" NPT connection
♦Teflon® gasket |
272037
272081 |
Part #: 272037
Adjustable shank designed to easily adjust to proper drain position
after installing in drum. Internal flame arrestor. FM approved
for use with oils (under 30 SAE) and non-corrosive flammables.
Minimum order Qty. 2.
Part #: 272081
Rigid shank design. External flame arrestor.
FM approved for use with oils (under 30 SAE) and non-corrosive
flammables.
Minimum order Qty. 2.
|
|
Heavy Duty
Stainless Steel Faucet
Features:
♦Adjustable shank designed to
easily adjust to proper drain position after installing in drum.
♦.75" NPT connection
♦Teflon®
gasket
|
272038 |
Part #: 272038
Internal flame arrestor. FM approved for use with oils
(under 30 SAE) and nonflammables, compatible with stainless steel.
|
|
Heavy Duty
2" Brass
Gate Valve
Features:
♦Fast, self-closing Teflon®
blade
♦2" NPT connection
|
272034 |
Part #: 272034
FM approved for use with viscous non-corrosive fluids heavier than 30
SAE
|
|
Vents
Features:
♦Automatically relieves pressure
at 5 PSI
♦Maximum flow of 220 CFM at 20 PSI
♦Flame arrestor prevents sparks
and flame from igniting drum contents
♦Fits 2" bung hole in steel and
plastic drums
|
272030 |
Part #: 272030
For drums in horizontal (pouring) position
Manual vacuum relief by lifting and rotating valve stem
FM approved
Minimum order Qty. 2.
|
|
Gauges
Features:
♦Economical way to gauge drum
contents
♦Heavy gauge glass and plated
steel construction
♦Accepts standard .75" NPT faucet
♦Buna-N seals; .75" NPT connection. 22" height (with supplied
fitting)
|
 
272005
272006 |
Part #: 272005
Basic gauge with fitting
Part #: 272006
Basic gauge with fitting and 272080 faucet
Part #: 272041
Basic gauge with fitting and 272083 faucet
|
|
Ground and Bond Wires
Features:
♦A wide variety of designs for grounding
and bonding applications
♦Inverted ring fits web-lifting
slings OSHA requires that all drums and containers storing and receiving
fluids with a FLASHPOINT BELOW 140°F be
grounded and bonded. Single drums must be grounded, with containers being
dispensed into bonded to the drum. Multiple drums must be bonded to each
other with one drum or the rack grounded. The following wires allow meeting
these important safety requirements. |
272032
272031
272033
272047
|
Part #: 272032
Deluxe Ground Wire: For connection between drum and true ground.
Three-foot-long heavy duty wire rope with "C" clamp on one end and alligator
clip on the other
Minimum order Qty. 5.
Part #: 272031
All Purpose Bond Wire: For bonding drums to each other, to containers
being filled, and to racks. Three-foot-long heavy duty wire rope with
"C" clamp on one end and alligator clip on the other
Minimum order Qty. 5.
Part #: 272033
Standard Bond Wire: For bonding drums to each other, to containers
being filled, and to racks. Three-foot-long heavy duty wire rope with
alligator clips on both ends.
Minimum order Qty. 5.
Part #: 272047
Heavy Duty Coiled Ground Wire
Minimum order Qty. 5.
|
